You are now at the right place for local appliance parts, repair, and maintenance tips. This site contains helpful tips and information lowes electric range about Stove Repair and Maintenance. This information can be used by a handy DIY homeowner to maintain their electric range like new. This information is applicable to all models of lowes electric range, including Amana Bosch, Crosley and Electrolux, Frigidaire and Jenn Air.
Lowes Electric Range
Lowes electric ranges have similar design elements. They heat up when electricity flows through them. There will be 4 to 6 burners on the cooktop. There are three main types of elements: Euro burners, radiant elements and coil elements. The surface burner switch controls them all. It can be set at different settings, from low (simmer), to high (boil).
The most popular and cost-effective of the three elements, coil elements, are made from an alloy between nickel and chrome. The element farm painting glows red when it heats up. These elements are usually plugged into receptacles, which allows for easy cleaning.
A ceramic or glass top covers the radiant element. To avoid any damage to the element, be careful with the type of burner you use and make sure to use ceramic-coated pans.
The oven has two types of elements: one for baking and one for broiling. The thermostat regulates temperature, while the selector switch controls the function of the oven: bake, broil and self-clean, timed-bake, and broil.
Maintenance Tips
Properly maintained appliances will last longer and work better. Before you start service, make sure that the unit is unplugged.
- For the exterior of your stove, use non-abrasive cleaners. To cut grease, add ammonia to warm soapy water.
- For self-cleaning ovens, refer to the owner’s manual
- If they have been stained for a long time, it is important to replace them every few years.
- To prevent spills from getting cooked-on or making it more difficult to clean up, immediately clean them up.
- Many parts of electric stoves can be replaced easily. Simply unplug the damaged part and plug in the new one.
